Saturday, 22 August 2015

Morpheuz 3.3 is now live

Morpheuz 3.3 is now live

This app requires your Pebble Time or Pebble Time Steel to be running Pebble Watch v3.3 and for your Pebble and Pebble Steel to be running v2.9.1

  • No background process. Morpheuz can now work happily with UP or Misfit. When these interrupt Morpheuz in order to sync their data, Morpheuz will, if it it monitoring sleep re-launch itself after 5 minutes. Morpheuz can easily co-exist with either of these or Battery+.
  • Phillips Hue light triggering on alarm. If the specified light is off, then it comes on at minimum brightness and brightens gently to maximum. If the light is already on Morpheuz leaves it unchanged. I'd like to extend a very special thanks to Robbie Page for patiently testing this facility.
  • Redesigned analogue face which is much easier to read.
  • Battery bar goes orange and then red on low battery (Pebble Time).
  • Better version propagation (again).
  • LIFX Smartbulb handling should now work correctly.
  • Menu shows action just before closing, providing a more solid positive feedback.
  • Highlight color of menu and settings now black on Pebble Time. This provides more contrast and makes it easier to see and read.
  • Removed additional jqplot header from HTML - minor but probably unnoticeable performance improvement.
  • Included a chart hyperlink in the CSV export. Now see the chart again as well as read a copy of your data
  • Ignore line on plot now matches width of chart so appears to cover 10 minutes as it should.
  • Provided a "Test pushover/smartlight settings" checkbox on save on the configuration page. Makes it possible to test without waiting until morning.
  • The horizontal marks on the movement chart are now at the threshold between deep, light and restless sleep.

14 comments:

  1. It won't load!
    Pebble time and iOS 8.4.1

    ReplyDelete
    Replies
    1. More a Pebble thing than a Morpheuz thing, but try shutting down and restarting your Pebble Time. If that doesn't work, delete Morpheuz completely and re-install.

      Delete
  2. Tried exactly that, it worked last night when I went to bed and set it to "Bedtime", when I tried to open it this morning it wont load. Restarted everything and reinstalled twice but it still doesnt load/Start.

    ReplyDelete
    Replies
    1. By won't load what do you mean? No config/settings page? Not starting on your watch? What phone and watch?

      Delete
  3. worked fine for me until today. comes up with a grey dot on my pebble and then goes back to app screen, and when i try and get into settings in android it freezes. have uninstalled and reinstalled many times.

    ReplyDelete
    Replies
    1. Your Pebble must be running v3.3 of the Pebble software as a minimum.

      Delete
  4. When I start it a progress bar starts but never gets done, thats it. Pebble gets unresponsive and I have to reboot. Iphone 5S.

    ReplyDelete
    Replies
    1. Pebble Time. I would consider unloading, rebooting your pebble and then loading again. Hope this helps

      Delete
  5. Now it works, will try again tomorrow. Thanks! :)

    ReplyDelete
  6. Loving the update. Kudos on the activity tracking change.

    ReplyDelete
  7. Similar problem here. App won't load. Phone screen showing loading bar for about 1 sec then says "No Internet Connection" when there is one. Settings on phone show spinning disc. Tried removing, restarting and adding again a number of times but no joy.

    3.3, Time Steel, iOS 8.4.1 on iPhone 6

    ReplyDelete
  8. This comment has been removed by a blog administrator.

    ReplyDelete

Bug? Please report using this form. Would like a new feature? Please use this form.